![background image](http://html1.mh-extra.com/html/abb/acs800-07-0610-3/acs800-07-0610-3_hardware-manual_3428312024.webp)
About this manual
18
Motor control and I/O board (RMIO)
shows external control connections to the motor
control and I/O board and its specifications.
Installation checklist and start-up
helps in checking the mechanical and electrical
installation of the drive.
Maintenance
contains preventive maintenance instructions.
Fault tracing
contains troubleshooting instructions.
Technical data
contains the technical specifications of the drive, e.g. ratings, frame
sizes and technical requirements, provisions for fulfilling the requirements for CE
and other markings and warranty policy.
Dimensions
contains information on the dimensions of the drive.
Resistor braking
describes how to select, protect and wire optional brake choppers
and resistors.
Installation and commissioning flowchart
Task
See
Plan the installation.
Check the ambient conditions, ratings, required
cooling air flow, input power connection, compatibility
of the motor, motor connection, and other technical
data.
Select the cables.
Technical data
Planning the electrical installation
Option manuals (if optional equipment is
included)
Unpack and check the units.
Check the type code indicated by the type
designation label with the original order. If the drive is
about to be connected to an IT (ungrounded) system,
check that the drive is not equipped with EMC/RFI
filE202. Check that all necessary optional
modules and equipment are present and correct.
Mechanical installation
Hardware description
For instructions on how to disconnect the EMC/
RFI filtering, contact your local ABB
representative.
If the converter has been non-operational for
more than one year, the converter DC link
capacitors need to be reformed. Contact your
local ABB representative for more information.
Only intact units may be started up.
Check the installation site.
Mechanical installation
,
Technical data
Route the cables.
Planning the electrical installation: Routing the
cables
Mount the cabinet line-up.
Mechanical installation
Check the insulation of the motor and the motor
cable.
Electrical installation
:
Checking the insulation of
the assembly
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
Summary of Contents for ACS800-07-0610-3
Page 4: ...Phone 800 894 0412 Fax 888 723 4773 Web www clrwtr com Email info clrwtr com ...
Page 7: ...Update Notice 3 Phone 800 894 0412 Fax 888 723 4773 Web www clrwtr com Email info clrwtr com ...
Page 10: ...Update Notice 6 Phone 800 894 0412 Fax 888 723 4773 Web www clrwtr com Email info clrwtr com ...