![background image](http://html1.mh-extra.com/html/abb/acs800-07-0610-3/acs800-07-0610-3_hardware-manual_3428312086.webp)
Electrical installation
80
Motor connection – Units without common motor terminal cubicle
Output busbars
The motor cables are to be connected to the output busbars behind each inverter
module. The location and dimensions of the busbars are visible in the dimensional
drawings delivered with the drive, as well as the example drawings presented in this
manual.
Connection diagram
The diagram below shows a drive with a single inverter module. 360° earthing is to
be used at cable entries.
Whenever the inverter unit consists of parallel-connected inverter modules, all the
modules (two are shown below) are to be
cabled separately
to the motor.
U2
V2
W2
PE
The recommended cable types are given in chapter
Planning the electrical installation
.
M
3~
U1
W1
V1
PE
Inverter unit cubicle
U2
V2
W2
PE
The recommended cable types are given in chapter
Planning the electrical installation
.
U2
V2
W2
M
3~
U1
W1
V1
PE
Inverter unit cubicle
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: [email protected]
Summary of Contents for ACS800-07-0610-3
Page 4: ...Phone 800 894 0412 Fax 888 723 4773 Web www clrwtr com Email info clrwtr com ...
Page 7: ...Update Notice 3 Phone 800 894 0412 Fax 888 723 4773 Web www clrwtr com Email info clrwtr com ...
Page 10: ...Update Notice 6 Phone 800 894 0412 Fax 888 723 4773 Web www clrwtr com Email info clrwtr com ...