ABB ACS150 series, User Manual

Page: 104 / 173

Actual signals and parameters
103
Parameters in the Long parameter mode
Index Name/Selection Description Def
2205 ACCELER TIME 2 Defines the acceleration time 2, that is the time required for the speed to
change from zero to the speed defined by parameter
2008 MAXIMUM FREQ.
See parameter 2202 ACCELER TIME 1.
Acceleration time 2 is used also as jogging acceleration time. See parameter
1010 JOGGING SEL.
60.0 s
0.0
…1800.0 s
Time
2206 DECELER TIME 2 Defines the deceleration time 2, that is the time required for the speed to
change from the value defined by parameter
2008 MAXIMUM FREQ to zero.
See parameter 2203 DECELER TIME 1.
Deceleration time 2 is used also as jogging deceleration time. See parameter
1010 JOGGING SEL.
60.0 s
0.0
…1800.0 s
Time
2207 RAMP SHAPE 2 Selects the shape of the acceleration/deceleration ramp 2. The function is
deactivated during emergency stop (
2109 EMERG STOP SEL).
Ramp shape 2 is used also as jogging ramp shape time. See parameter 1010
JOGGING SEL.
0.0 = LINEAR
0.0 = LINEAR
0.
0…1000.0 s
See parameter 2204 RAMP SHAPE 1.
2208 EMERG DEC TIME Defines the time within which the drive is stopped if an emergency stop is
activated. See parameter
2109 EMERG STOP SEL.
1.0 s
0.0
…1800.0 s
Time
2209 RAMP INPUT 0 Defines the source for forcing the ramp input to zero. 0 = NOT SEL
0 = NOT SEL Not selected
1 = DI1 Digital input DI1. 1 = ramp input is forced to zero. Ramp output ramps to zero
according to the used ramp time.
2 = DI2 See selection DI1.
3 = DI3 See selection DI1.
4 = DI4 See selection DI1.
5 = DI5 See selection DI1.
-1 = DI1(INV)
Inverted digital input DI1. 0 = ramp input is forced to zero. Ramp output
ramps to zero according to the used ramp time.
-2 = DI2(INV) See selection DI1(INV).
-3 = DI3(INV) See selection DI1(INV).
-4 = DI4(INV) See selection DI1(INV).
-5 = DI5(INV) See selection DI1(INV).