manualshive.com logo in svg

ZyXEL Communications XGS2220 Series, Руководство пользователя

Продукт ZyXEL Communications XGS2220 Series предоставляет пользователю высококачественное управление сетью. Вы можете скачать бесплатное руководство пользователя с manualshive.com для настройки и использования этого продукта. Благодаря подробным инструкциям в руководстве, вы сможете быстро начать работу с устройством.

Поделиться
Скачать
background image

 Chapter 74 DHCP Snooping

XGS2220 Series User’s Guide

491

Last Failed Time

This field displays the last time the Switch updated the DHCP snooping database 
unsuccessfully.

Last Failed 

Reason

This field displays the reason the Switch updated the DHCP snooping database 
unsuccessfully.

Counters

This section displays historical information about the number of times the Switch successfully or unsuccessfully read 
or updated the DHCP snooping database.

Total Attempts

This field displays the number of times the Switch has tried to access the DHCP snooping 
database for any reason.

Startup Failures

This field displays the number of times the Switch could not create or read the DHCP 
snooping database when the Switch started up or a new URL is configured for the DHCP 
snooping database.

Successful 

Transfers

This field displays the number of times the Switch read bindings from or updated the bindings 
in the DHCP snooping database successfully.

Failed Transfers

This field displays the number of times the Switch was unable to read bindings from or 
update the bindings in the DHCP snooping database.

Successful Reads This field displays the number of times the Switch read bindings from the DHCP snooping 

database successfully.

Failed Reads

This field displays the number of times the Switch was unable to read bindings from the 
DHCP snooping database.

Successful Writes This field displays the number of times the Switch updated the bindings in the DHCP 

snooping database successfully.

Failed Writes

This field displays the number of times the Switch was unable to update the bindings in the 
DHCP snooping database.

Database Detail

First Successful 

Access

This field displays the first time the Switch accessed the DHCP snooping database for any 
reason.

Last Ignored Bindings Counters

This section displays the number of times and the reasons the Switch ignored bindings the last time it read bindings 
from the DHCP binding database. You can clear these counters by restarting the Switch or using CLI commands. 
See the Ethernet Switch CLI Reference Guide.

Binding Collisions This field displays the number of bindings the Switch ignored because the Switch already 

had a binding with the same MAC address and VLAN ID.

Invalid Interfaces This field displays the number of bindings the Switch ignored because the port number was 

a trusted interface or does not exist anymore.

Parse Failures

This field displays the number of bindings the Switch ignored because the Switch was unable 
to understand the binding in the DHCP binding database.

Expired Leases

This field displays the number of bindings the Switch ignored because the lease time had 
already expired.

Unsupported 

VLANs

This field displays the number of bindings the Switch ignored because the VLAN ID does not 
exist anymore.

Last Ignored 

Time

This field displays the last time the Switch ignored any bindings for any reason from the DHCP 
binding database.

Total Ignored Bindings Counters

This section displays the reasons the Switch has ignored bindings any time it read bindings from the DHCP binding 
database. You can clear these counters by restarting the Switch or using CLI commands. See the Ethernet Switch 
CLI Reference Guide.

Binding Collisions This field displays the number of bindings the Switch has ignored because the Switch already 

had a binding with the same MAC address and VLAN ID.

Table 280   SECURITY > IPv4 Source Guard > DHCP Snooping > DHCP Snp. Status (continued)

LABEL

DESCRIPTION

Содержание XGS2220 Series
















































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для XGS2220 Series

Cisco Catalyst 3110G Getting Started Manual preview
Catalyst 3110G
Бренд: Cisco Страницы: 30
Pathway connectivity solutions 1016 Manual preview
1016
Бренд: Pathway connectivity solutions Страницы: 2
FS 108710 Quick Start Manual preview
108710
Бренд: FS Страницы: 23
UfiSpace S9180-32X Hardware Installation Manual preview
S9180-32X
Бренд: UfiSpace Страницы: 25
Equip Vision 332702 Manual preview
Vision 332702
Бренд: Equip Страницы: 10
REV Ritter RF102R Assembly And Operating Instructions Manual preview
RF102R
Бренд: REV Ritter Страницы: 15
H3C DA-06D12 User Manual preview
DA-06D12
Бренд: H3C Страницы: 10
NBase Communications NH2001M Installation And User Manual preview
NH2001M
Бренд: NBase Communications Страницы: 72
A-Neuvideo HD-88CT-A Instruction Manual preview
HD-88CT-A
Бренд: A-Neuvideo Страницы: 26
Fairchild FSD210 Operator'S Manual preview
FSD210
Бренд: Fairchild Страницы: 19
Brocade Communications Systems TurboIron 24X series Hardware Installation Manual preview
TurboIron 24X series
Бренд: Brocade Communications Systems Страницы: 82
Ubiquiti EdgeSwitch Quick Start Manual preview
EdgeSwitch
Бренд: Ubiquiti Страницы: 14
Metra Electronics CS-HDM3X1SW3 User Manual preview
CS-HDM3X1SW3
Бренд: Metra Electronics Страницы: 8
SEH IH-304 User Manual preview
IH-304
Бренд: SEH Страницы: 40
Eaton Moeller IZM Series Quick Start Manual preview
Moeller IZM Series
Бренд: Eaton Страницы: 4
Linksys LGS310C Quick Start Manual preview
LGS310C
Бренд: Linksys Страницы: 4
Lindy 42346 User Manual preview
42346
Бренд: Lindy Страницы: 16
LEGRAND Chief Kontour KPWR Series Installation Instructions Manual preview
Chief Kontour KPWR Series
Бренд: LEGRAND Страницы: 8

Бренды по названию

Популярные бренды

Загрузить еще бренды