ZyXEL Communications XGS2220 Series, Руководство пользователя

Страница: 167 / 655

Chapter 23 IP Setup
XGS2220 Series User’s Guide
167
23.3.1 Add/Edit IP Interfaces
Use this screen to add or edit IP interfaces. Click Add/Edit , or select an entry and click Add/Edit in the
SYSTEM > IP Setup > IP Setup screen to display this screen.
Figure 115 SYSTEM > IP Setup > IP Setup > Add/Edit
Apply Click Apply to save your changes to the Switch’s run-time memory. The Switch loses these
changes if it is turned off or loses power, so use the Save link on the top navigation panel to save
your changes to the non-volatile memory when you are done configuring.
Cancel Click Cancel to reset the fields to your previous configuration.
IP Interface
Use this section to view and configure IP routing domains on the Switch.
Index This field displays the index number of an entry.
IP Address This field displays the IP address of the Switch in the IP domain.
IP Subnet Mask This field displays the subnet mask of the Switch in the IP domain.
VID This field displays the VLAN identification number of the IP domain on the Switch.
Type This field displays the type of IP address status. Static or DHCP .
Select an entry’s check box to select a specific entry. Otherwise, select the check box in the
table heading row to select all entries.
Add/Edit Click Add/Edit to add a new IP interface or edit a selected one.
Delete Click Delete to remove the selected IP interfaces.
Table 57 SYSTEM > IP Setup > IP Setup (continued)
LABEL DESCRIPTION