Zeiss S100, Инструкция по эксплуатации

Страница: 193 / 278

Version 9.0
G-30-1781-en
Page 193
S100 / OPMI pico Operation
Network
In the "Network" tab you can set your network configurations.
Fig. 89: Network
1 IP Settings
MAC Address
The MAC address (Media Access Control Address) is the hardware address
of each individual network adapter that serves as a unique identification
of the device in a computer network if required. The unique MAC address
is required to create a SW recording license.
DHCP activated:
Network link via a dynamic IP address "DHCP".
A dynamic IP address is an IP address that is automatically assigned to
the requesting device by an address service (DCHP server) available in
the network.
After applying the activated DHCP, you can read out the values
transmitted from the DHCP server using the buttons IP Address,
Subnet Mask and Standard Gateway.
DHCP deactivated:
Network connection via a static IP address.
Static IP addresses are fixed IP addresses, permanently assigned to
a system. You can obtain the data required for this purpose (IP address,
subnet mask and standard gateway) from your IT Administrator.
• Enter the data and use "Apply" to activate the changes.
For more detailed information on the network configuration,
see "Configuring the Network Connection (default settings)" in Page 195.
1
*2
4
3