Zeiss S100, Инструкция по эксплуатации

Страница: 92 / 278

Preparations for use S100 / OPMI pico
Version 9.0
Page 92 G-30-1781-en
Mounting the surgical microscope
After you have mounted the OPMI pico, the suspension arm may move
downwards. Prevent the OPMI pico from knocking against anything.
Adjustment screw(1) on the suspension arm of the S100 suspension
system only acts as a brake but has no locking function.
Without coupling
• Tighten the adjustment screw (1) (braking function).
• Insert the shaft (5) into the the suspension arm's holding fixture.
• Screw in and tighten the safety screws (2) and (4).
• The safety screw (2) contains a hex socket head screw (3). This is an
additional safety screw. Tighten it.
Including 120° coupling
• Tighten the adjustment screw (1) (braking function).
• Insert the shaft (6) into the the suspension arm's holding fixture.
• Screw in and tighten the safety screws (2) and (4).
• The safety screw (2) contains a hex socket head screw (3). This is an
additional safety screw. Tighten it.
• Insert the shaft (5) into the holding fixture of the coupling. Position and
tighten the safety screws (7) and (8).
• The safety screw (8) contains a hex socket head screw (9). This is an
additional safety screw. Tighten it.
Including K 0/120 coupling
We recommend using the K 0/120 coupling for gynecological procedures.
This makes it possible to shift the working area downwards by 115mm.
• Tighten the adjustment screw (1) (braking function).
• Insert the shaft (10) into the the suspension arm's holding fixture.
• Screw in the securing screws (2) and (4). Tighten it.
• The safety screw (2) contains a hex socket head screw (3). This is an
additional safety screw. Tighten it.
• Insert the shaft (5) into the holding fixture of the coupling. Position and
tighten the safety screws (11).