Zeiss S100, Инструкция по эксплуатации

Страница: 210 / 278

What to do in the event of malfunctions S100 / OPMI pico
Version 9.0
Page 210 G-30-1781-en
Lamp in light source
remains dark and fan is
running Knob for brightness control
set to left-hand stop. Turn knob clockwise. Page 70
Inclination switch
deactivated. Move suspension arm of
surgical microscope down
from its standby position. –
Inclination switch out of
adjustment or defective Notify Service. –
Lamp module has no
contact. Insert lamp module to the
stop. –
In a halogen light source:
Halogen lamp defective.
Switch to backup lamp. Page 224
In a halogen light source:
Ceramic base does not have
proper contact with
halogen lamp.
Plug ceramic base firmly
onto contacts of halogen
lamp. Page 224
In a xenon light source:
Xenon lamp defective.
Switch to backup lamp. Page 217
In a LED light source:
LED light source defective.
Notify Service. –
Defective stand electronics. Illuminate surgical area with
an OR illuminator.
Notify Service.
–
Lamp goes constantly off
and on again during
operation. Ventilation openings are
covered or dirty. Ventilation openings must
be clear; clean them if
necessary. –
Defective fan. Illuminate surgical area
with an OR illuminator.
Notify Service.
–
Failure of suspension
electronics. Illuminate surgical area
with an OR illuminator.
Notify Service.
–
Defective magnification
changer. - Notify Service. –
Filters in illumination beam
path are defective or cannot
be exchanged. - Notify Service. –
Fault Possible reason Corrective measure Cross
reference