Zeiss S100, Инструкция по эксплуатации

Страница: 159 / 278

Version 9.0
G-30-1781-en
Page 159
S100 / OPMI pico Operation
SDTV FORMAT submenu
If a conventional display device (monitor, projector, etc.) with the 4:3 format
is connected, the "SDTV FORMAT" submenu allows you to choose between
"LETTERBOX" and "SIDE-CUT" visualization.
LETTERBOX Use this setting for display devices that are not compatible with the 16:9
widescreen format. Black bars will appear at the top and bottom of the screen
and the image will be displayed in the 16:9 format.
SIDE-CUT
In this setting, the sides of the image will be cut, displaying the center of the
image with a 4:3 aspect ratio.
Proceed as follows to select an image format and to load the respective
configuration:
• Press the <Config> key for approx. 5 seconds to go to the installation
menu.
• Select the menu item "SDTV FORMAT MODE" in the installation menu
using the
control keys and press the <enter> button.

The following menu appears:
• Select the desired mode with the control keys.

The selected choice is displayed with an arrow.

The properties of each format are explained at the lower end of the
screen.
• Press the <Enter> key to save the changes.

The selection is saved. The camera restarts after you have confirmed
that the setting is to be applied.
• If you do not want to save your changes, return to the installation menu
via "CANCEL". The image is displayed as it was when the submenu was
accessed.
SDTV FORMAT

LETTERBOX
SIDE-CUT
CANCEL
DISPLAY VIDEO PICTURE WITH BLACK STRIPES AT TOP AND BOTTOM