Zeiss S100, Инструкция по эксплуатации

Страница: 116 / 278

Preparations for use S100 / OPMI pico
Version 9.0
Page 116 G-30-1781-en
Attachment of instrument tray and flat screen monitor
bracket for S100 floor stand (Option)
Ergonomic arrangement of flat screen holder and instrument tray
In order to ergonomically position the flat screen holder (2) and the
instrument tray (3), loosen the adapter (1), adjust its height and lateral
position and screw it firmly into place again:
Instrument tray • Hold the instrument tray with one hand and unscrew the four locking
screws on the adapter (1) by a few turns using the hex key until the
adapter (1) can easily be moved.
• Adjust the height of the instrument tray (3) as required (max. 800mm from
the floor)and uniformly tighten all four clamping screws of the adapter (1)
using a hex key (2.1Nm).
• When clamping the adapter (1) into position ensure that the distance (4)
between the two parts of the adapter (1) is uniform.
Flat screen holder • Hold the flat screen holder with one hand and unscrew the four locking
screws on the adapter(1) by a few turns using the hex key until the
adapter(1) can be easily moved.
• Position the flat screen holder (2) at the required height (max. 1230 mm
from the floor) and uniformly tighten (2.1Nm) all four clamping screws of
the adapter (1) using a hex key (2.1Nm).
• When clamping the adapter (1) into position ensure that the distance (4)
between the two parts of the adapter (1) is uniform.
NOTE Overload of the instrument tray!
When overloaded, the instrument tray may break off or bend, the suspension
system may topple over and auxiliary equipment may fall off the instrument
tray. When overloaded, the instrument tray may break off or bend,
the suspension system may topple over and auxiliary equipment may fall
off the instrument tray.
• Make sure that the accessory equipment is positioned as securely as
possible on the instrument tray.
• The instrument tray may not be loaded with more than 13 kg.