Zeiss S100, Инструкция по эксплуатации

Страница: 20 / 278

Safety measures S100 / OPMI pico
Version 9.0
Page 20 G-30-1781-en
xenon light source
– UV / IR heat protection filter
The filter protects against UV and IR radiation.
– Temperature monitoring
A sensor constantly monitors the lamp temperature.
1 Switching to the backup lamp
The xenon light source has a lamp module containing two xenon lamps.
The second lamp is used as backup lamp. Manually swivel in the backup
lamp into position (Page 217), if the maximum service ;life of 500 hours
is reached (see chapter "Maintenance intervals" on Page 222). When the
red segment (2) in the knob (1) lights up, the backup lamp is in use.
Keep the lamp module ready if you work with the backup lamp.
If the backup lamp is operated, replace the lamp module in a timely
manner (see Page 224) before it is used beyond its maximum service life
of 500 hours (see chapter "Maintenance intervals on Page 222).
Fig. 2: Safety system xenon
light source
CAUTION Limited service life of the xenon lamp!
If used longer than the indicated service life of 500 hours the xenon lamp
may fail or burst.
Dropping fragments may contaminate the sterile area. Risk of infection.
• Change the lamp module on time.
1
3
2