Zeiss S100, Инструкция по эксплуатации

Страница: 222 / 278

Care and Maintenance S100 / OPMI pico
Version 9.0
Page 222 G-30-1781-en
Device maintenance
Electromagnetic
compatibility (EMC)
No regular inspections or maintenance procedures are required in order to
maintain electromagnetic compatibility (EMC).
Maintenance intervals
Regular preventive maintenance is required in order to ensure safe and correct
operation of the device as well as a long service life.
The following table lists the relevant maintenance activities and shows at
which maximum intervals they must be performed.
The maintenance activities that you are able to perform yourself are described
below.
Any other maintenance activities that is not described here in detail requires
device-specific knowledge.
Please contact your local ZEISS Service or authorized partner to arrange for
the timely performance of these maintenance activities.
Interval Maintenance tasks
Max. 12 weeks Exchange xenon lamp if it is operated for 8 hours / day on 5 days / week.
This corresponds to the service life of a xenon lamp of 500 h.
Max. 25 weeks Exchange xenon lamp if it is operated for 4 hours / day on 5 days / week.
This corresponds to the service life of a xenon lamp of 500 h.
Every 2 years Visual inspection and function test of the following modules:
– S100 suspension system
– Illumination and power supply unit
– Surgical microscope with tube
– Light guide
– Power cord
– Connected accessories
– Secure seating of OPMI suspension
– Securing screws are available and tightened