Zeiss S100, Инструкция по эксплуатации

Страница: 213 / 278

Version 9.0
G-30-1781-en
Page 213
S100 / OPMI pico What to do in the event of malfunctions
Picture too bright /
image on monitor
appears milky
Monitor not correctly set. Set monitor to default status,
or reduce brightness and /
or contrast.
Please
refer to
monitor's
Instructions
for Use.
Brightness of video unit
set too high.
Reduce brightness of video unit. Page 166
Surgical field illumination
too bright.
Reduce brightness of surgical
field illumination. Page 70
HNO application: image
detail in black speculum
too bright, too shiny Video unit: light meter function - set "Small Spot" Page 82
Brightness of CCU set
too high.
Reduce brightness of
video unit.
Page 166
Brightness control is based
on black color of speculum. Center the speculum and
object in center of screen.
–
Use a metal speculum
(gray, stainless steel).
–
Fault Possible reason Corrective measure Cross
reference
Fault Possible reason Corrective measure Cross ref-
erence
Remote control does not
work. Battery in remote control
discharged. Replace battery. Page 231
Remote control pointed in
wrong direction or distance
of remote control from
device too short. Point remote control at
front of device; distance
should be more than 0.5 m. –