Zeiss S100, Инструкция по эксплуатации

Страница: 91 / 278

Version 9.0
G-30-1781-en
Page 91
S100 / OPMI pico Preparations for use
Configuring the surgical microscope
CAUTION Risk of injury due to sinking surgical microscope or falling parts!
Mounting and removing modules and accessories may lead to unintended
tilting of the surgical microscope. Parts or modules may drop.
The suspension arm may rise or sink.
This may lead to injury to persons or to material damage.
• Please only use accessories approved by ZEISS.
• Never change modules or auxiliary equipment during a surgical
procedure or above the patient!
• Mount documentation accessories only in accordance with the
appropriate instructions for use.
• After every change in configuration and before every use, make sure
that the modules and accessories are securely locked in position.
• Make sure that all securing screws and locking screws are tightened
firmly!
• Make sure not to exceed the maximum load capacity of the device during
the installation of accessories and components.
• Readjust the balance of the suspension arm after every change of
accessories (see Page 103).
• Readjust the adjustment screw for mobility. The adjustment screw has
only a braking, no locking function.
WARNING Danger of tipping due to overloading!
The mounting and removal of accessories may lead to unintentional tipping
of the surgical microscope.
• Make sure that the maximum permissible load on the suspension arm is
not exceeded.