Zeiss S100, Инструкция по эксплуатации

Страница: 152 / 278

Operation S100 / OPMI pico
Version 9.0
Page 152 G-30-1781-en
The following options are available:
– FREEZE / LIVE
If the current live video image is displayed and the foot switch is pressed,
the live video image is frozen and displayed on the monitor as a freeze
frame. With renewed pressing of the foot switch the live video image is
displayed again.
– USER 1 / USER 2
(or Endodonty / Treatment or Anterior / Posterior)
If the foot switch is pressed you can switch between User 1 and User 2.
If the current user is neither User 1 nor User 2, User 1 is switched on the
first time the foot switch is pressed.
– USER3 / USER4
You can switch between User 3 und User 4 by pressing the foot switch.
If the current user is neither User 3 nor User 4, User 1 is switched on the
first time the foot switch is pressed.
– INVERTED / STANDARD (is only needed in the case of a special tube)
If you press the foot switch and the live video image is being displayed,
the live video image rotated 180° on the monitor. With renewed pressing
of the foot switch the live video image is displayed again.
You can select under "SWITCHING MODE" if a remote function shall be
controlled via a foot switch or a fundus imaging system. The following control
types are available:
– FOOTSWITCH / AUX
Function control is performed via a foot switch.
– FUNDUS SYSTEM
The function is controlled via a fundus imaging system. This setting is only
available under the "OPHTHALMOLOGY" application.
CAUTION Not for ophthalmic examinations!
• The S100 / OPMI pico must not be used for ophthalmological procedures!