YOKOGAWA CW140 Скачать руководство пользователя страница 93

Страница: 93 / 292

9-5

IM CW140-E

Electric Energy Measure Mode

9.3 Integration in Electric Energy Measure Mode

●

Start of Integration

Even if you have finished setting the time and commanded the start of

integration by an external trigger, integration does not begin unless you press

the

key (status LED indicator comes on). Integration begins only when

setting of the time has been completed, the START&STOP key has been

pressed, and the

mark comes on.

Indicates the status in which the starting time of integration is set and
that the CW140 is ready for integration.

Indicates the status in which the START&STOP key is pressed and that
the LED indicator comes on.

Indicates that the START&STOP key should be pressed one more time
to begin integration.

Status LED
indicator

START&STOP key

CW140
main unit

Location of START&STOP key

and LED indicator

LED indicator

comes on.

LED indicator

goes out.

LED indicator

comes on.

Ready for

integration

(STANDBY)

Ready for

integration

(STANDBY)

Integration in
progress

Press the START&STOP
key to begin integration.

Scheduled starting

time of integration

TIP

• The changing of settings is not allowed during integration (viewing only).

• The setting of a time that precedes the current time is not allowed. In addition, the CW140 shows an

error message if, after time setting, the preset starting time of integration has expired before integra-

tion begins.

●

End of Integration

If the end of integration has been specified by setting the time or using a timer,

the CW140 automatically stops integration and the

mark

appears when the preset time is up.

• Forcibly stopping integration before the preset time is up

Press the START&STOP key.

The following message appears.

Forcibly stops

Integration.

Scheduled ending
time of Integration

Integration in
progress

Stop integrate?

ENTER: YES ESC: NO

ESC

To stop

Integration

, press the key.

To cancel the procedure for stopping

Integration

, press the key.

Содержание CW140





































































































































































































































































































Результаты поиска

Содержание CW140

Отзывы:

YOKOGAWA CW140, Руководство пользователя, Страница: 93 / 292

Результаты поиска

Содержание CW140

Отзывы: