YOKOGAWA CW140 Скачать руководство пользователя страница 54

Страница: 54 / 292

IM CW140-E

7-2

7.1 Wiring

●

Selecting Measured Wiring Type

Follo the steps below to set up the wiring in each measurement mode.

Press the

key to reveal the screen for selection.

Press the corresponding

key to select the type of wiring to measure.

3W3i

→

Changes the
labels to

Changes the labels
back to

Select the power line type to proceed to the wiring check.

To check:

See Section 7.2, "Checking Wiring"

To not check: Return to the measurement screen.

NOTE

• The type of wiring cannot be changed during continuous measurement.

• It also cannot be changed when in electric energy mode and the elapsed time, “PASSAGE

TIME”, is not at zero, or in demand mode and the remaining time, “DEMAND REST TIME”, is not
at zero.

• Be sure to press the

key for three seconds or more and then clear the integrated value

before changing the type of wiring.

Содержание CW140





































































































































































































































































































Результаты поиска

Содержание CW140

Отзывы:

YOKOGAWA CW140, Руководство пользователя, Страница: 54 / 292

Результаты поиска

Содержание CW140

Отзывы: