YOKOGAWA CW140, Руководство пользователя, Страница: 92 / 292

IM CW140-E
9-4
9.3 Integration in Electric Energy Measure
Mode
This section explains how to start/stop continuous measurement (integration)
or output data in the Electric Energy Measure mode.
●
Procedure for Starting Integration
(TIME): Enters the starting time (default is the current time).
(TRIGGER) - Control: Allows you to control integration by inputting a
signal to the START/STOP input terminals.
(MANUAL): Allows you to start integration by pressing the key.
The default for this key is "Manual".
●
Procedure for Stopping Integration
(TIME): Enters the ending time.
(TIMER): Enters the time taken from the start to the end of
integration.
(TRIGGER) - Control: Allows you to control integration by inputting a
signal to the START/STOP input terminals.
(MANUAL): Allows you to stop integration by pressing the key.
The default for this key is "Manual".
Setting the time:
Use the key to move through the fields of the date and time setting, as
shown below.
2000 / 01 / 01 / hour : minute
Year
↔
Month
↔
Day
↔
Hour
↔
Minute
(+): Increment
(–): Decrement
Input a value.
Setting the time:
Use the key to move through the fields of the time setting, as shown
below.
0000 h / 00 m/ 00 s
Hour (and no. of digits) ↔ Minute ↔ Second
(+): Increment
(–): Decrement
Input a value.
You can set the interval from the starting to the ending time, in 10-second
increments, to a maximum of 1000 hours.
Holding down the (+) or (–) key during input of a value,
increases the speed with which the value changes.