YOKOGAWA CW140 Скачать руководство пользователя страница 115

Страница: 115 / 292

11-9

IM CW140-E

Demand Measure Mode

11.5 Setup Data Items of Demand Measure Mode

●

Basic Setting/Changing Operations

• Selection of setup data item to be set/changed

Using the

key, select the setup data item to be changed. (The item is

highlighted.)

For more information, see the tables of setup data items that follow.

• Press the relevant

key to change the setting.

The functionality corresponding to each function key varies depending on

the selected setup data item.

• Press the

key to make changes to the next page.

• Pressing the

key completes your settings. (The display changes to

a measurement screen.)

• If none of the settings needs to be changed, press the

ESC

key. The display

changes to a measurement screen.

TIP

• The changing of settings is not allowed when the CW140 is in a stand-by state or is performing

demand measurement (only viewing is allowed).

Содержание CW140





































































































































































































































































































Результаты поиска

Содержание CW140

Отзывы:

YOKOGAWA CW140, Руководство пользователя, Страница: 115 / 292

Результаты поиска

Содержание CW140

Отзывы: