YOKOGAWA CW140 Скачать руководство пользователя страница 33

Страница: 33 / 292

3-11

IM CW140-E

Precautions for Safe Measurement

3.6 Connecting a Power Supply and Turning It On/Off

Using the AC Adapter (Standard Accessory)

●

Handling Precautions

There is a danger of electrical shock or damage to the meter. Observe the

following cautionary notes when handling the AC adapter.

WARNING

• Only use the manufacturer-supplied dedicated power cord.

• Before connecting the power cord, make sure the power-source voltage matches the supply

voltage rating of the AC adapter.

• Before connecting the power cord, also make sure the power switch on the CW140 is turned

off.

• If the CW140 is not to be used for a prolonged period, disconnect the power cord from the

outlet.

• Do not use any other AC adapter than the one (part number: 788011) dedicated to the CW140.

• Do not place any load on the power cord or allow the power cord to come into accidental

contact with any heat source.

• Be sure to hold the plug of the power cord, rather than holding and pulling the cord itself, when

disconnecting it from the outlet.

Содержание CW140





































































































































































































































































































Результаты поиска

Содержание CW140

Отзывы:

YOKOGAWA CW140, Руководство пользователя, Страница: 33 / 292

Результаты поиска

Содержание CW140

Отзывы: