YOKOGAWA CW140 Скачать руководство пользователя страница 134

Страница: 134 / 292

IM CW140-E

12-14

12.5 Setup Data Items of Harmonics Measure Mode

• Page 2/2 of the screen

SELECT ORDER (Default: The ODD option is set to ON.)

ORD. 1

ODD ON

OFF

F1 (ALL): Sets all orders to ON.

F2 (ODD): Sets all odd-numbered orders to ON and
all even-numbered orders to OFF.

F3 (SELECT): Select ON/OFF for each order.

: ON

: OFF

Change the setting.

With the key, select the order whose setting you want to change.

: ON

: OFF

Change the setting.

The default of all four data items is ON, as shown below:
ALL-P.F.

: ON

EVENT INPUT : ON
THD (IEEE)

: ON

THD (CSA)

: ON

With the key, select the order whose setting you want to change.

TIP

Even if you set data items to be saved/printed, they are not saved/printed if the LOGGING setup data

item is set to OFF.

You are not allowed to set the SAVE/PRINT ITEM data item so that the number of selected data items

exceeds 250. If you fail to follow this rule, the CW140 shows an error message.

Содержание CW140





































































































































































































































































































Результаты поиска

Содержание CW140

Отзывы:

YOKOGAWA CW140, Руководство пользователя, Страница: 134 / 292

Результаты поиска

Содержание CW140

Отзывы: