YOKOGAWA CW140 Скачать руководство пользователя страница 113

Страница: 113 / 292

11-7

IM CW140-E

Demand Measure Mode

11.4 Demand Measurement in Demand Measure Mode

●

Outputting Demand Data

This paragraph explains how to output data acquired during an interval from

the start to the end of demand measurement. You can change/define settings

related to data output by pressing the

(SETUP) key in the Demand

Measure mode.

• Data Output Setting

DATA OUTPUT:

Select from the ON and OFF options.

• Condition Settings for Data Output (with "DATA OUTPUT" set to ON)

OUTPUT INTERVAL: Same as the demand period setpoint (no setup

data item is shown).

For the demand period, select from:

5, 10, 15 and 30 minutes or 1, 2, 3, 4, 6, 8, 10

and 12 hours.

OUTPUT MEDIA:

Select:

"MEMORY" to save in internal memory;

"FD" to save on a floppy disk; or

"PRINTER" to print.

FILENAME:

Type the file name of data to be saved.

SAVE/PRINT ITEM:

Select the data item to be saved or printed.

SEE ALSO

Section 11.5, "Setup Data Items of Demand Measure Mode," for details on the setup data items.

TIP

You are not allowed to set the time interval from the start to the end of demand at a value smaller than the

DEMAND PERIOD setpoint. If you set such a value, the CW140 shows an error message when you

press the

key.

Содержание CW140





































































































































































































































































































Результаты поиска

Содержание CW140

Отзывы:

YOKOGAWA CW140, Руководство пользователя, Страница: 113 / 292

Результаты поиска

Содержание CW140

Отзывы: