manualshive.com logo in svg

YOKOGAWA CW140, Руководство пользователя, Страница: 22 / 292

Поделиться
Скачать
YOKOGAWA CW140 Скачать руководство пользователя страница 22

IM CW140-E

2-8

2.4 Overrange and Other Marks Shown during Measurement

●

Other Marks

Screen View

: Appears if the demand exceeds the reference power level.

:

Denotes the scaling function.

Appears if either the VT or CT ratio is set at a value other than 1.

:

Appears when the reactive power method is used.

:

Appears when display hold is enabled.

:

Appears when a current overrange occurs.

:

Appears when a voltage overrange occurs.

:

Appears when the CW140 is configured so that data is stored in

internal memory.

:

Appears when the CW140 is configured so that data is stored

on a floppy disk.

:

Appears when the CW140 is configured so that data is output to

a printer.

:

Appears when the battery becomes low (low-battery mark).

:

Appears when an AC adapter is used.

:

Appears when the CW140 is in a key lock state.

TIP

 • The Floppy Disk mark is only effective if an optional external floppy disk drive is used.

 • The Printer mark is only effective if an optional external printer is used.

 • The Low-Battery mark appears if either an optional NiMH battery pack or alkaline batteries are used.

 • The 

 (Low-Battery mark) and 

 (AC Adapter mark) indications share the same position of view

on the display.

Содержание CW140





































































































































































































































































































Отзывы:

Нет отзывов