Yamaha RCX40, Руководство пользователя

Страница: 345 / 388

9-
9
9
T
roubleshooting
1. Error Messages
3.6 : Too many breakpoints
Code : &H0306
Meaning/Cause : Setting of break point exceeding 4 points was attempted.
Action
: After deleting unnecessary break points, set the new break point.
(Up to 4 break points can be set in one program.)
3.7 : Breakpoint doesn’t exist
Code : &H0307
Meaning/Cause : Break point was not found during search.
Action
: Set a break point if needed.
3.9 : Cannot find strings
Code : &H0309
Meaning/Cause : Could not find specified character string during search.
Action : If needed change the character string and try searching again.
3.10 : Object program doesn’t exist
Code
: &H030A
Meaning/Cause : The object program name is not registered.
Action : Make an object program.
3.11 : Cannot use function
Code
: &H030B
Meaning/Cause : Unable to execute or unneeded hierarchy was selected.
Action : ---
3.12 : Cannot overwrite
Code : &H030C
Meaning/Cause
: In AUTO mode or PROGRAM mode, overwrite of a program be-
ing selected cannot be made by communication with a program of
the same name.
Action
: 1. Change the mode.
2. Change the program name.
3.13 : Changing data prohibited
Code : &H030D
Meaning/Cause : Data cannot be changed because access level is not at 0.
Action
: Set the access level to 0.
3.14 : Cannot use mode
Code : &H030E
Meaning/Cause : Specified mode cannot be changed because access level is set to
level 2 or level 3.
Action
: Change the access level to 0 or 1.