Xante Accel-a-Graphix CT4, Руководство пользователя

Страница: 271 / 310

____________________________________ Application Notes A-11
4. Click Size in the Paper Size and Orientation box. A window
appears where you can enter or select the height and width of
the paper you are using.
5. Enter or select the width and height of the paper which you are
going to use respectively in the Width and height fields. Then,
click OK and the Plot Configuration window appears again.
6. Make sure Scale to Fit is selected in the Scale, Rotation, and
Origin box.
7. Select OK.
Now you are ready for plotting your document to the controller.
Refer to your AutoCAD manual for further details on printing from
AutoCAD.
AutoCAD Tip: To make the controller the default so that you do
not need to select it each time you open a document, use the
following procedure.
1. Open an AutoCAD document.
2. Select Print from the File menu.
3. Click and hold on the Printer box. A window appears listing
printer drivers.
4. Click Cancel.
5. Save the document.
The next time the document is opened, the controller will be the
default printer. Use this same process with any other documents that
were created and saved with a different printer selected as the output
device.