manualshive.com logo in svg

Xante Accel-a-Graphix CT4, Руководство пользователя

Поделиться
Скачать
Xante Accel-a-Graphix CT4 Скачать руководство пользователя страница 125

_______________________________________

 Configuration  5-31

The Enable Menu

The Enable menu, PARALLEL:ENABLE, allows you to enable
(YES) or to disable (NO) the parallel interface on your controller.
The factory default is YES.

The Mode Menu

The Mode menu, PARALLEL:MODE, allows you to select the
PostScript mode. Options are PS STD, PS BIN, and PS TBCP. The
factory default is PS STD.

PS STD

for standard PostScript

PS BIN

for binary PostScript

PS TBCP

for tagged binary communication protocol

PostScript

The Buffer Menu

The Buffer menu, PARALLEL:BUFFER, allows you to reserve a
buffer area in the controller’s RAM to hold incoming files. Options
are 8K, 16K, 32K, 64K, 128K, 256K, 512K, 1024K, 2048K, and
4096K. The factory default setting is 128K.

Note:

This setting only takes effect if the controller is idle and
there is enough RAM available for the buffer.

The Spool Menu

The Spool menu, I/F:SPOOL, allows you to enable (YES) or disable
(NO) spooling to the parallel interface. The factory default is NO.
(See “Using the Spooler” in chapter 6 for more details.)

Содержание Accel-a-Graphix CT4























































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды