39
14.6.2 Local input - configuration
If component are installed in one or more inputs, these inputs are to be configured.
Which item to be configured depends on the type of input
– see description below.
Local input - configuration
Overview ’Local input’
Example of
overview ’Local input’ with connected input card
(WCA 3KI)
Overview ’Local input’ - more
“S3 Close” and “S3 Open” are the two buttons on the board.
Pressing “-“ in the “Local Input” menu, the status of the local and
Master safety signal are shown.
Used to associate Master Safety signal to Motor groups.
Local inputs are to be configured in:
Configuration of local input on X7
Input X7 on WCA 3SP (smoke detector)
If a smoke detector is connected in the local input X7 on the WCA
3SP card, it shall be configured in:
1.
Input type: informs the type “smoke detector”
(not to be
configured)
2.
Control smoke zones
2.1
Function in controlled smoke zones
(displayed only
if ‘Control smoke zones‘ is selected)
3.
Active state
4.
Threshold short-circuit error
The appendix contains all the items that can be configured - see
appendix for detailed explanation.
