43
14.8 Weather station type
Here is to be selected which type of weather station
–none, WOW or WLA - that is connected.
(The menu “Weather” is only used for input from WCA 3SP input S1X10.2 for wind speed from WLA 340. Input S1X10.2 is also
used in combination with weather station WOW 201/202/204 for wind direction dependent smoke ventilation - see section 10.4 in
the installation instruction).
WLA 33x is not considered as a weather station and is connected directly to the input X10.5, see section 14.6.3
Weather - configuration
Overview ’Sensor type’
Overview ’Sensor type’ (selection of type of weather station).
If several WSC 3x0 panels are connected via a WSK-Link
™
, the
WSK-Link
™
allows the panels to share weather data.
The panel with the connected weather station will be the master.
The first time a slave panel discovers a master panel, the “WSK-
Link
™ Master present” will become true.
In the slave panels
”Sensor type” should subsequently be set to
“WSK-Link
™
” in order for them to receiver weather data from the
master.
Weather shall be configured in:
Configuration of the sensor
None
(no configuration)
WOW
1.
Filter constant
2.
Slow filter constant
3.
Use RMS in filter
The appendix contains all the items that can be configured - see
appendix for detailed explanation.
WLA
1.
Pulses/sec. per m/s
2.
Filter constant
3.
Slow filter constant
4.
Use RMS in filter
The appendix contains all the items that can be configured - see
appendix for detailed explanation.
From WSK Link™
(no configuration)
Only to be set in slave panels connected to a master panel with
connected weather station.
