34
Motor lines configuration
±24V actuator configuration
The ±24V actuators are to be configured in:
1.
Output mode: informs the type of the actuator selected
2.
Motor configuration
3.
Stroke time
4.
Motor group
5.
Manual command - auto off-period
6.
Retry during alarm
7.
Sequential control type
8.
Sequential control position limit
9.
Sequential control with
10.
Sequential control with no
11.
Sequential control position logic
12.
Sequential control position
13.
Sequential control position
The appendix contains all the menus that can be configured - see
appendix for detailed explanation.
The MotorLink
®
actuators are to be configured in:
MotorLink
®
motor configuration
1.
Output mode: informs the type of the actuator selected
2.
Expected no. of motors
(displayed if actuator type =
MotorLink
®
)
3.
Motor group
4.
Expected no. of locking motors
4.1 No. of found locking motors
(see appendix)
5.
Manual speed
6.
Auto. speed
7.
Manual command
– auto off period
8.
Retry during alarm
9.
Max unexpected overcurrent
10.
Max unexpected overcurrent (motor)
11.
Sequential type
12.
Sequential position limit
13.
Sequential control with
14.
Sequential control with no
15.
Sequential control position logic
16.
Sequential control position
17.
Sequential control position
The appendix contains all the menus that can be configured - see
appendix for detailed explanation.
Motor lines
– maximum current configuration
Whether ±24V or MotorLink™ actuators are used, the motor line
can be configured to a maximum current of either 5, 10 or 20A.
The configuration is made in the
“Motor Line” menu under “View
all details”.
The total power consumption of all connected actuators must not
exceed 10A or 20A depending on panel size.
