32
13.2 Rotation of the touch screen
The picture on the touch screen can be rotated 180°
14
Configuration
– main menu
All connected components (actuators, break glass units, keypads, weather station etc.) are to be configured.
As the panel has pre-settings for PIN code for access to level 3, the code is to be entered before it is possible to begin the
configuration (see chapter 14.15
“Log in”).
Before starting on the configuration it can be an advantage to change some of the pre-set settings. Ex. the language can be
changed from English to Danish or German (see section 14.15
“System”) and the orientation of the text on the touch screen can
be rotated for a better viewing angle (see section 13.2
”Rotation of the touch screen”). It is also possible to change the log out
time, which is the time that the access to the access level is open/the touch screen in on (see section 0
“Log in”)
To configure a sub menu:
→ press the light blue number field
→ enter value / the number of the motor line / change factory settings etc. The setting which can be entered depends of the
type of the sub menu.
→ accept on
A menu can consist of more screen plays. To get to the next screen: → press
14.1 Motor lines
– motor groups – smoke zones
All the components are to be assigned to groups and zones:
-
motor lines are to be assigned to motor groups
-
motor groups can be assigned to smoke zones
-
break glass units and smoke detectors are to be assigned to smoke zones
-
keypads are to be assigned to one or more motor groups
14.1.1 Examples with motor lines / motor groups / smoke zones
- 6 motor lines: one or more actuators connected to the lines
- 3 motor groups: the actuators in the motor group are operated simultaneously on the keypad
- 2 smoke zones: the actuators in the smoke zone are operated simultaneously on the break glass unit
