42
14.7.1 Numbering of local output
All local outputs on the WCA 3SP card are numbered.
The number of the output depends on its location on the card - see overview below.
As the output (fault signal to Fire Alarm System) on the WCA 3SP card cannot be configured it is not numbered.
Smoke ventilation panel with motor line and input cards
14.7.2 Local output - configuration
If component are installed in one or more outputs, these outputs are to be configured.
Which item to be configured depends on the type of output
– see description below.
Local output - overview
Overview ’Local output’
Overview ’Local output’
Local output shall be configured in:
Configuration of a local output
(shown for S1 X9.3/4)
1.
Output type: informs the type ‘Binary output’ (is
not
to be
configured)
2.
Output mode
2.1
Controlled by smoke zones
(displayed only when ‘Siren‘ is
selected)
2.2
Time out
2.3
Smoke zones output functions
3.
Controlled by smoke zones*
(displayed only when
‘output
mode is selected to ‘Binary output‘)
3.1 Smoke zone output functions
3.2 Logic function
3.3 Status when active
3.4 Time out
4.
Controlled by motor groups
a) Motor group output function
b) Logic function
c) Status when active
d) Time-out
*
The output can either control smoke zones or motor groups.
When one is selected the other option will disappear from the
touch screen.
The appendix contains all the items that can be configured - see
appendix for detailed explanation.
