Wincor Nixdorf TH180, Руководство программиста

Страница: 85 / 162

TH180 Programmer’s Guide
80
(5) For page mode
a. The bar code is only expanded. It is not printed.
When bar code expansion is finished, the next dot of the final data of the bar
code is set as the next data expansion start position.
b. If parameter d is outside the definition area, command processing is canceled.
From the next data, the data is processed as normal data.
The data expansion start position is not moved.
c. If the horizontal width of the bar code exceeds the print area of one line, the
data expansion start position is moved to the left end outside the print area.
The bar code is not printed.
(6) This command is ignored if:
a. The bar code data contains an undefined code.