Wincor Nixdorf TH180, Руководство программиста

Страница: 76 / 162

TH180 Programmer’s Guide
71
GS v 0 m xL xH yL yH d1 ~ dk
[Designation] Print a raster bit image
[Format] 1DH, 76H, 30H, m, xL, xH, yL, yH, d1 to dk
[Valid limits] 0 m 3, 48 m 51
0 xL 255
0 xH 255
0 yL 255
0 yH 8
0 d 255
k = (xL + xH×256) × (yL + yH×256) where k 0
[Initial value] ---
[Function] (1) Prints a raster bit image in mode m.
(2) m specifies print mode.
m Mode
Vertical dot
density
Horizontal dot
density
0, 48 Normal mode 203 DPI 203 DPI
1, 49
Double character
width mode
203 DPI 101 DPI
2, 50
Double character
height mode
101 DPI 203 DPI
3, 51
Quadruple size
mode
101 DPI 101 DPI
(3) xL and xH set the number of horizontal data pieces in a bit image at (xL +
xH×256) bytes.
(4) yL and yH set the number of vertical data pieces in a bit image at (yL +
yH×256) bytes.
(5) This command is only valid when the standard mode is selected and the print
buffer contains no data.
(6) This command is valid when the page mode is selected, in a buffer data
regardless of having or not to have.
(7) All print modes (such as character size specification, emphasized printing,
double printing, inverted printing, underlining, and white/black reverse
printing) do not affect a raster bit image.
(8) If the print area width specified using the Set left margin command (GS L) or the
Set printing area width command (GS W) is smaller than the minimum
horizontal width, the print area width is enlarged to the minimum horizontal
width only for that line. The minimum horizontal width is one dot for normal
mode (m = 0, 48) and double character height mode (m = 2, 50), and two dots
for double character width mode (m = 1, 49) and quadruple size mode (m = 3,
51).
(9) Data out of a print area is discarded in units of dots.