Wincor Nixdorf TH180, Руководство программиста

Страница: 30 / 162

TH180 Programmer’s Guide
25
Command Details
Commands related to printing instructions
LF
[Designation] Print and line feed
[Format]
0AH
[Valid limits] ---
[Initial value] ---
[Function] (1) Prints the data in the print buffer and executes line feed based on the specified
amount of line feed. (Standard mode)
(2) After printing is finished, the beginning of a new line is set as the next print
position.
(3) When the initial value of line feed increments is smaller than the height of
printed data:
a. Line feed operation is performed according to line feed increments if no data is
printed.
b. A line feed operation is performed according to the height of print data
(including underlined data) if print data is included.
FF
[Designation] Print and return to standard mode (in page mode)
[Format] 0CH
[Valid limits] ---
[Initial value] ---
[Function] (1) Batch-prints the data expanded in all print areas and returns to standard mode.
(2) The expanded data is erased after printing.
(3) The specified print area is initialized using the Set printing area in page mode
command (ESC W).
(4) The paper is not cut.
(5) After printing is finished, the beginning of a new line is set as the next print
position.