Wincor Nixdorf TH180, Руководство программиста

Страница: 45 / 162

TH180 Programmer’s Guide
40
ESC V n
[Designation] Turn 90°clockwise rotation mode on/off
[Format] 1BH, 56H, n
[Valid limits] 0 n 1, 48 n 49
[Initial value] n = 0
[Function] (1) Selects/cancels 90-degree clockwise rotation of characters.
(2) Parameter n is defined as listed below.
n Function
0, 48 Cancels 90-degree clockwise rotation of characters.
1, 49 Specifies 90-degree clockwise rotation of characters.
2,50
(3) Even when underlining is specified (ESC !, ESC -, FS -), characters are not
underlined if 90-degree clockwise rotation is specified for them.
(4) When 90-degree clockwise rotation of characters is specified, the directions of
their double-width expansion and double-height expansion are the reverses of
those when 90-degree clockwise rotation of characters is canceled.
(5) The setting of this command has no effect in page mode.
(6) When page mode is selected, entering this command only manipulates the
internal flags of the printer.
(7) When characters rotated 90 degrees clockwise are printed, the line and
character spacing’s of these characters are specified using the Set right-side
character spacing (ESC SP) and line spacing commands, respectively.
ESC V 1
ESC V 0
A
B
C
A
B
C
A
B
C
A
B
C
A A A A
B B B B
C C C C