Wincor Nixdorf TH180, Руководство программиста

Страница: 143 / 162

TH180 Programmer’s Guide
138
GS ( L pL pH m fn
[
parameter
]
GS 8 L p1 p2 p3 p4 m fn
[
parameter
]
[Designation] Graphics data designation
[Format] 1DH, 28H, 4CH, pL, pH, m, fn, [ parameter ]
1DH, 38H, 4CH, p1, p2, p3, p4, m, fn, [ parameter ]
*The format of GS ( L is used to explain the different functions.
GS ( L and G S 8 L are the same functions.
As for the different functions, once the [ parameter ]is over 65535 bytes, GS 8 L is used.
[Function] (1) Function code (fn) executes the designated graphics data processing.
fn Format Function No. Function
0,48 GS (L pL pH m n Function 48 Transmits the NV graphics memory
capacity
2,50 GS (L pL pH m n Function 50 Prints the stored graphics data in the
print buffer
3,51 GS (L pL pH m n Function 51 Transmits the NV graphics memory
remaining capacity
64 GS (L pL pH m n d1 d2 Function 64 Transmits the NV graphics defined
key code list
65 GS (L pL pH m n d1 d2
d3
Function 65 Clears all the NV graphics data
collectively.
66 GS (L pL pH m n kc1 kc2 Function 66 Clears the designated NV graphics
data
67 GS (L pL pH m n a kc1
kc2 b xL xH yL yH [c
d1…dk]1…[c d1…dk ]b
Function 67 Defines the raster format graphics
data as non-volatile memory.
69 GS (L pL pH m n kc1 kc2
x y
Function 69 Prints the designated NV graphics
112 GS (L pL pH m n a bx by c
xL xH yL yH d1…dk
Function 112 Stores the raster format graphics data
to the print buffer.
pL,pH designates the subsequent byte counts of m as (pL+pHx256).
(2) Using this command often may cause destruction of the non-volatile memory.
Use this command that writes data to the non-volatile memory less than 10 times per day.