Wincor Nixdorf TH180, Руководство программиста

Страница: 33 / 162

TH180 Programmer’s Guide
28
ESC d n
[Designation] Print and feed n lines
[Format] 1BH, 64H, n
[Valid limits] 0 n 255
[Initial value] ---
[Function] (1) Prints the data in the print buffer and advances the paper n lines.
(2) After printing is finished, the beginning of the new line is set as the next print
position.
(3) This command does not affect a paper feed amount specified using the
following commands:
a. Select 1/6-inch line spacing (ESC 2)
b. Set line spacing (ESC 3)
(4) If [n×(basic calculated pitch)] exceeds about 900 mm (35.4 inches), the paper is
advanced about 900 mm (35.4 inches).
(5) When the initial value of line feed increments is smaller than the height of
printed data:
a. Line feed operation is performed according to line feed increments if no
data is printed.
b. A line feed operation is performed according to the height of print data
(including underlined data) if print data is included.