Wincor Nixdorf TH180, Руководство программиста

Страница: 151 / 162

TH180 Programmer’s Guide
146
<Function 1> GS ( M pL pH f n m
[Format] 1DH, 28H, 4DH, pL, pH, fn, m
[Valid limits] (pL+pH×256)=2 (pL=2, pH=0)
fn=1,49
m=1,49
[Function] (1) It copies the value setting stored in the operation area to the storage area
(2) Using this command often may cause destruction of the non-volatile memory.
Use this command that writes data to the non-volatile memory less than 10 times per day.
<Function 2> GS ( M pL pH fn m
[Format] 1DH, 28H, 4DH, pL, pH, fn, m
[Valid limits] (pL+pH×256)=2 (pL=2, pH=0)
fn=2,50
m=0, 1, 48, 49
[Function] (1) (m=0, 48) initializes the total value settings of the operation area as recorded values in the
specification.
(2) (m=1,49) copies the value settings stored in the storage to the operation area
But , if the saved data in storage does not exist, it changes to the initial values recorded in the
specification.
<Function 3> GS ( M pL pH fn m
[Format] 1DH, 28H, 4DH, pL, pH, fn, m
[Valid limits] (pL+pH×256)=2 (pL=2, pH=0)
fn=3,51
m=0, 1, 48, 49
[Function] (1) ( m=0,48) does not execute the load processing from the storage to the operation area during
initialization.
(2) ( m=1,49) executes the load processing from the storage to the operation area during the
initialization.
GS ( N pL pH fn
[
parameter
]
[Designation] Designates character decoration
[Format] 1DH, 28H, 4EH, pL, pH, fn, [ parameter ]
[Function] (1) Function code (fn) executes the process regarding the designated character decoration.
fn Format Function No. Function
48 GS ( N pL pH fn m Function 48 Selects the character color