Wincor Nixdorf TH180, Руководство программиста

Страница: 122 / 162

TH180 Programmer’s Guide
117
Commands related to extension functions
GS ( A pL pH n m
[Designation] Execute test print
[Format] 1DH, 28H, 41H, pL, pH, n, m
[Valid limits] (pL + pH × 256) = 2 (pL = 2, pH = 0)
0
n 2 , 48 n 50
1
m 4 , 49 m 52
[Function] (1) This command executes the designated test printing.
n selects the target paper for test printing.
n Paper type
0,48 Roll paper
1,49
2,50
m designates the type of test printing.
m Test printing type
1,49 Hex dump
2,50 Status print of printer
3,51 Test print
4,52 Alignment Pattern
Note: The printing can be stopped when the FEED switch is pressed during test printing.
The firmware chart number and the version are first printed depending on the
firmware level.
(2) The printer executes the hardware reset when processing of this printer is over.
At that time, the receive buffer and print buffer is cleared and various settings (such as
downloaded characters, macro, character decoration, etc.) return to the state when power
goes on.
(3) This command is valid only when entered at the beginning of a line.
(4) This command is skipped when page mode.