Wincor Nixdorf TH180, Руководство программиста

Страница: 115 / 162

TH180 Programmer’s Guide
110
GS I n
[Designation] Transmit printer ID
[Format] 1DH, 49H, n
[Valid limits] 1 n 3, 49 n 51, 65 n 69, n=112
[Initial value] ---
[Function] (1) Transmits the following information after command execution, according to the
setting of parameter n.
N Printer ID type Specification ID
1, 49 Model ID TH180 2EH
2, 50 Type ID See the following table 02H
3, 51 ROM version Depends on the ROM version "A" to "Z"
(2) The type ID transmitted by this command is as follows:
Bit Function
Value
0 1
0 2-byte code Not supported Supported
1 Auto-cutter No Yes
2 To be defined Fixed at 0
3 To be defined Fixed at 0
4 Not used Fixed at 0
5 To be defined Fixed at 0
6 To be defined Fixed at 0
7 Not used Fixed at 0
(3) Transmits the following information after command execution, according to the setting
of parameter n.
N Kind of printer information Information
65 Firmware version Firmware version
66 Maker Wincor Nixdorf
67 Model TH180
68 Serial No. Serial No.
69 Kind of font ‘’ (None)
112 DIP switch condition First byte = 40H
Second byte = 40H
The transmission form of printer information is as follows;
Header 5FH
Data Printer information
NUL 00H
(4) Table: DIP switch information