Wincor Nixdorf TH180, Руководство программиста

Страница: 141 / 162

TH180 Programmer’s Guide
136
<Function 48> GS ( H pL pH fn m d1 d2 d3 d4
[
Designation] Selection of the process ID response.
[Format] 1DH, 28H, 48H, pL, pH, fn, m, d1, d2, d3, d4
[Valid limits] (pL+pH×256)=6 (pL=6, pH=0)
fn=48
m=48
32 d 126
[Function] (1) Appointed process ID(d1,d2,d3,d4) is connected with the data which I handled just before that. And
it is saved.
Hex Decimal Data number
Header 37H 55 1 byte
Identification 22H 34 1 byte
Process ID
( d1, d2, d3, d4 )
20H~7EH 32~126 4 byte
N U L 00H 0 1 byte
(2) The reply as follows. The numerical value is a hex digit .
<Example.1> Cover open at printing
a) Data send Print data + LF
b) Command send 1D 28 48 06 00 30 30 46 46 46 46
c) ASB 3C 40 00 FF (Cover open at printing.)
d) ASB 14 00 00 FF (Cover close.)
e) Command response 37 22 46 46 46 46 00
<Example.2> continuity printing.
a) Data send Print data + LF
b) Command send 1D 28 48 06 00 30 30 30 30 31 35
c) Data send Print data + LF
d) Command send 1D 28 48 06 00 30 30 30 30 31 36
e) Data send Print data + LF
f) Command send 1D 28 48 06 00 30 30 30 30 31 37
g) Data send Print data + LF
h) Command send 1D 28 48 06 00 30 30 30 30 31 38
g) Data send Print data + LF
h) Command send 1D 28 48 06 00 30 30 30 30 31 39
g) Data send Print data + LF
h) Command send 1D 28 48 06 00 30 30 30 30 31 41
g) Data send Print data + LF
h) Command send 1D 28 48 06 00 30 30 30 30 31 42
i) Command response 37 22 30 30 31 35 00
j) Command response 37 22 30 30 31 36 00
k) Command response 37 22 30 30 31 37 00
l) Command response 37 22 30 30 31 38 00
m) Command response 37 22 30 30 31 39 00
n) Command response 37 22 30 30 31 41 00
o) Command response 37 22 30 30 31 42 00