All information, illustrations and technical specifications in these operating instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification.
90
8.0 Maintenance
8.10. Maintaining and cleaning the precise overseeding unit
8.10.2. Spreading material hopper
ACHTUNG
:
Risk of injury during maintenance work.
This can lead to crushing due to inadvertent start-up of the machine or short
circuit.
•
Disconnect the electrical power supply before starting maintenance, repair
and cleaning work.
•
Wear appropriate working and protective clothing during all work
.
Cleaning the agitator
1. Unscrew 6 screws (1).
2. Pull out agitator (2).
3. Clean agitator (2) and check for wear.
4. When installing the agitator, push the
groove onto the pin (arrows, 3).
5. Reattach the agitator in the correct position
with the 6 screws (1).
Removing/mounting the hopper
1. Unscrew 6 screws (1).
2. Pull out agitator (2).
3. Clean agitator (2) and check for wear.
4. When installing the agitator, push the
groove onto the pin (arrows, 3).
5. Reattach the agitator in the correct position
with the 6 screws (1).
