Wiedenmann Terra Float Air Скачать руководство пользователя

Страница: 22 / 107

All information, illustrations and technical specifications in these operating instructions are based on the latest information available at the time of

publication. We reserve the right to make design changes at any time without prior notification.

2.0. Assembly

2.4.2.

Attaching the precise overseeding unit

3.1

Install the control panel

Install the universal holder supplied in the package in
the working range of the driver.

The installation is specifically dependent upon the carrier
vehicle provided, and must be adapted to its conditions.

1. Secure the universal holder to the

vehicle using point (1) and (2)

2. Thread the battery connection cable (6)

through the opening (3).

3. Secure the battery cable plug (4) to the

holder (5).

Note

Protect the control panel against damage
and moisture

Route all the electrical cables in such a
manner that they are not damaged during
operation.

Bl k

Содержание Terra Float Air












































































































Результаты поиска

Содержание Terra Float Air

Отзывы:

Похожие инструкции для Terra Float Air

Бренды по названию

Популярные бренды

Wiedenmann Terra Float Air, Руководство по эксплуатации

Результаты поиска

Содержание Terra Float Air

Отзывы:

Похожие инструкции для Terra Float Air

Бренды по названию

Популярные бренды