All information, illustrations and technical specifications in these operating instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification.
47
7.0. Operation
7.3. Working with the Terra FLOAT
Sequence: Three-point version
Sequence: Attachment version
NOTE:
Lower the attached
TERRA FLOAT only:
on the area to be worked
on
NOTE:
Lower the detached
TERRA FLOAT only:
on the area to be worked
on
1.
Lower the TERRA FLOAT to
the ground.
2.
Set tractor rear hydraulic
system to floating
position
1.
Lower the TERRA FLOAT to
the ground.
2.
Lift chassis off the
ground
3.
Lock hydraulic ball cock
to safeguard the chassis
against accidental
lowering
Stop after several metres to check the working depth across the entire working width.
NOTE: The tension springs must be adjusted so as to suit the particular lawn surfaces.
If the working depth is even
=
the tension springs are tensioned
correctly.
If the inner working depth is shallower
than the outer working depth
=
Increase the tensioning on the tension
springs
If the outer working depth is shallower
than the inner working depth
=
Decrease the tensioning on the
tension springs
