All information, illustrations and technical specifications in these operating instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification.
83
8.0 Maintenance
8.7. Wheels and Tyres
Regularly check the tyre
pressure:
Wheels of chassis……..…..
250 kPa
Wheels of reseeding unit.…..
60 kPa
CAUTION:
Serious or fatal injuries
can be caused by the
explosion-type bursting of
the tyres and by the rim
parts.
Only carry out tyre
installation if you have
appropriate experience and
equipment.
Always adhere to the
recommended tyre pressure.
Never inflate the tyres
over the recommended
pressure. Do not heat the
wheels or tyres or carry
out welding on them.
Heating the tyres can lead
to explosion-type tyre
bursts as the pressure in
the tyre thereby becomes
very high. Welding can lead
to deformations or damage
of the wheel.
When inflating the tyres,
select a filling connection
with a safety clip and an
extension hose with
sufficient length so that
you can stand to one side
when inflating the tyres.
Never stand in front of or
on the tyre. If available,
use a safety cage.
Check wheels and tyres
daily for low pressure,
slits, bulges, damaged
rims, missing wheel bolts
or –nuts.
