All information, illustrations and technical specifications in these operating instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification.
31
4.0. Connecting to the Tractor
4.1. General Information
CAUTION DANGER :
Do not exceed the max.
authorized axle load of the
tractor.
Ensure that there is sufficient
front axle load to maintain
steerability (where required
attach ballast weights i.a.w.
the tractor’s operating
instructions).
Always pay attention to:
The load of the lower guide bar
connection.
Only attach the TERRA SLIT if:
when the engine is switched off,
and the PTO shaft is stationary.
4.2. Ballast
When mounting equipment at the
rear, always ensure there is
sufficient front axle load;
steering must remain supported.
Loads must always be attached
to the mounting points provided
in accordance with regulations.
When selecting the front axle
load, ensure that the
permissible axle load weight,
as well as the permissible
overall weight including the
mounted equipment, is not
exceeded.
ATTENTION !
Specifications in the Operating
Instructions for the tractor
must be observed.
