All information, illustrations and technical specifications in these operating instructions are based on the latest information available at the time of publication.
We reserve the right to make design changes at any time without prior notification.
70
7.0. Operation
7.5. Operating the precise overseeding unit
7.5.6. Automatic dosing
Stopping automatic dosing:
The dosing system will be stopped automatically when the hydraulics are raised or the travel speed is less than 1.5
km/h. The spreading procedure restarts when both signals are received again.
1. The spreading procedure can be stopped at any
time by pressing the Start/Stop key.
Possible settings in automatic mode,
The output rate and product can be set at any time. A product change is only possible if several products have al-
ready been stored, see Chapter 4.5.4, "Calibration test"
1. Select a product or output rate by turning the turn-
and-push button.
2. Push the turn-and-push button to edit the product
selection or output rate.
3. Turn the turn-and-push button to choose between
the products or values.
4. Push the turn-and-push button to confirm the prod-
uct selection or output rate.
START/STOP
