All information, illustrations and technical specifications in these operating instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification.
85
8.0 Maintenance
8.9. Replace the plain bearing bushes
The Terra Float must either be attached to the
tractor or your garage has a suitable crane system.
1.
Release tension spring
2.
Remove lower bearing bolts
(1)
from
tension springs
3.
Push parking supports up and secure
4.
Dismantle pressure pads
5.
Dismantle half shells
Carefully lower the Terra Float onto the ground.
Place a mat under the connection points as it will
make it easier to remove the bolts.
6.
Remove the protective screw
(2)
7.
Remove the bearing bolt
(3)
8.
Lift the support box and remove
9.
Remove the protective screw
(4)
10.
Remove the attachment screws
(5)
11.
Remove the bearing bolt
(6)
12.
Remove the inside support frame
(7)
13.
Renew the plain bearing bushings
(8)
on
the rotating base
(9)
14.
Pull the left roller outwards
