All information, illustrations and technical specifications in these operating instructions are based on the latest information available at the time of publication.
We reserve the right to make design changes at any time without prior notification.
68
7.0. Operation
7.5. Operating the precise overseeding unit
7.5.5.14. Blower
To switch on blower:
1. press blower button.
The blue status LED will flash.
The blower will accelerate to the last setting.
After reaching this setting, the blue status LED will
be lit.
To switch off blower:
1. press and hold the blower key for 3 seconds.
The blower will switch off.
The orange status LED will be lit.
To set the blower:
1. press the blower key whilst the blower is operating.
The current setting will be displayed.
2. Set the required value by turning the turn-and-push
button.
3. Confirm your selection by pressing the turn-and-
push button.
The entry will be confirmed.
The start menu will be displayed.
Advice
Setting a high blower power increases energy consumption.
Lateral distribution can be varied by means of the blower power.
