All information, illustrations and technical specifications in these operating instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification.
21
2.0. Assembly
2.4.2. Attaching the precise overseeding unit
Install the speed sensor
(A)
at
a maximum distance of 4 mm from
the spiked roller or star
roller
(B)
.
Note:
Please check that there is contact around the
entire circumference of the roller (LED lights up
on the sensor) and readjust if necessary.
Insert the sensor cable in
connection 6 on the control
panel
(C)
(see Chapter 7.5.1).
Fit the VGM magnet
(D)
to the
middle roller mounting.
Secure the VGM sensor
(E)
to
the support
(F)
provided on the
frame and position at a maximum
distance of 8 mm from the
magnet
(D)
